Schedule exterior roof walkthrough
We coordinate site access, verify ladder placement meets 250-pound rating, and confirm weather allows safe surface inspection without ice or snow.
Denver & Front Range Roofers
Colorado Springs Roof Inspection for High-Elevation Homes
Peak to Peak Roofing delivers roof inspection in Colorado Springs tailored to hail damage, wind uplift, and altitude-driven UV stress. We pair drone photogrammetry with attic moisture mapping and hold an A+ BBB rating across 415 verified reviews.
- Hail & Wind Documentation Test squares and damage maps prepared for insurance adjusters and PPRBD permits.
- Drone & Infrared Scans EagleView takeoffs and FLIR thermography locate hidden moisture without core cuts.
- Same-Day Summary Reports Photo logs, slope diagrams, and condition grades delivered within hours of site visit.
- A+ BBB Rating 4.9 stars across 415 Google reviews and Owens Corning Platinum Award winner.
4.9/5 average rating from 500+ locals
Certified, Accredited, And Reviewed
What Roof Inspection Costs in Colorado Springs
Independent third-party inspections for real estate transactions or insurance certifications typically run $200 to $400 in Colorado Springs, compared to $250 to $500 in Denver. The difference reflects lower labor rates and shorter travel distances within the metro. Storm-damage assessments for insurance claims are often provided at no cost when we document hail or wind damage that supports a claim.
Storm or claim inspection
- Typical cost or specification
- No charge
- What drives the price
- Free when the visit supports a hail or wind claim, including photo documentation.
- Code or standard reference
- Colorado SB 38 roofing contractor requirements.
Detailed condition report with photos
- Typical cost or specification
- $175 to $425
- What drives the price
- Roof size, number of planes and how much attic access the report covers.
- Code or standard reference
- NRCA inspection and documentation guidelines.
Drone or infrared moisture scan
- Typical cost or specification
- $275 to $550
- What drives the price
- Added when a low-slope section or trapped attic moisture needs to be mapped.
- Code or standard reference
- ASTM C1153 infrared moisture survey practice.
Real estate transaction certification
- Typical cost or specification
- $225 to $450
- What drives the price
- Written remaining-life estimate and certification letter for a lender or buyer.
- Code or standard reference
- Lender certification, typically two to five years of remaining life.
Attic ventilation and intake review
- Typical cost or specification
- Included with inspection
- What drives the price
- Intake and exhaust are measured against roof area rather than estimated.
- Code or standard reference
- IRC R806.2 one to 150 net free ventilating area.
Post-repair verification visit
- Typical cost or specification
- Included on our work
- What drives the price
- Controlled water test and final photo set after the repair closes out.
- Code or standard reference
- Manufacturer application instructions and workmanship warranty.
Permit authority
- Typical cost or specification
- Pikes Peak Regional Building Department
- What drives the price
- Handles applications, code review, and final inspection across the region.
- Code or standard reference
- Permit authority
Wind standard
- Typical cost or specification
- 130 mph design wind speed
- What drives the price
- Sets six-nail patterns and high-wind starter strip requirements.
- Code or standard reference
- Wind-speed standard
| Scope or factor | Typical cost or specification | What drives the price | Code or standard reference |
|---|---|---|---|
| Storm or claim inspection | No charge | Free when the visit supports a hail or wind claim, including photo documentation. | Colorado SB 38 roofing contractor requirements. |
| Detailed condition report with photos | $175 to $425 | Roof size, number of planes and how much attic access the report covers. | NRCA inspection and documentation guidelines. |
| Drone or infrared moisture scan | $275 to $550 | Added when a low-slope section or trapped attic moisture needs to be mapped. | ASTM C1153 infrared moisture survey practice. |
| Real estate transaction certification | $225 to $450 | Written remaining-life estimate and certification letter for a lender or buyer. | Lender certification, typically two to five years of remaining life. |
| Attic ventilation and intake review | Included with inspection | Intake and exhaust are measured against roof area rather than estimated. | IRC R806.2 one to 150 net free ventilating area. |
| Post-repair verification visit | Included on our work | Controlled water test and final photo set after the repair closes out. | Manufacturer application instructions and workmanship warranty. |
| Permit authority | Pikes Peak Regional Building Department | Handles applications, code review, and final inspection across the region. | Permit authority |
| Wind standard | 130 mph design wind speed | Sets six-nail patterns and high-wind starter strip requirements. | Wind-speed standard |
Figures are typical roof inspection ranges for Colorado Springs in 2026, benchmarked against published Denver metro roofing cost data and adjusted for local permit fees and access. Code references point to the International Residential Code as adopted locally, UL 2218 impact testing, ASCE 7 wind loads and OSHA fall protection rules. Your written estimate follows an on-site inspection.
Customer Testimonials
Best Roof Inspection Approach for Pikes Peak Region Homes
Most contractors walk a roof once and call it done. That misses the real story. We combine on-roof visual assessment with attic moisture mapping and infrared scans to catch what surface checks alone never will. You can see everything we handle locally on our Colorado Springs roofing page.
- Exterior Envelope Scan
- Eaves, fascia, soffits, and siding interfaces checked for water intrusion paths.
- On-Roof Visual Assessment
- Covering, flashings, penetrations, and terminations documented with slope and measurement capture.
- Attic Interior Inspection
- Decking condition, active leaks, ventilation NFA calculation, and condensation evidence recorded.
"Not only did Damon thoroughly examine and diagnosis my problem, he made sure that the work was completed immediately due to an impending rainstorm.", Alexa Armanino
Why Colorado Springs Homeowners Trust Peak to Peak Roofing
Clients here need someone who understands PPRBD permit stages, hail-damage documentation for insurance claims, and how altitude accelerates UV degradation. We deliver that every time, backed by an A+ BBB rating and 415 verified reviews.
- Active member of the Colorado Roofing Association with ongoing code and standards training
- A+ rating from the Better Business Bureau reflecting complaint-free service history
- Owens Corning Platinum Award Winner recognizing installation quality and warranty compliance
- 4.9-star rating across 415 verified Google reviews from Front Range homeowners
- Member of the National Roofing Contractors Association with access to NRCA technical manuals
"Luke came out to evaluate free of charge, handled the connection with a structural engineer, and did EXCELLENT work.", Ethan Harry
How We Deliver Roof Condition Assessments in Colorado Springs
Every Colorado Springs project runs on the same documented sequence, from first inspection through the city's final sign-off.
Document slope and flashing defects
Pitch gauge and laser distance tools capture area takeoff; step flashing, counter flashing, and drip edge integrity photographed at every transition.
Inspect attic ventilation and moisture
Electronic moisture meters scan decking for elevated readings; ventilation net free area calculated against IRC 1:150 ratio and baffle placement verified.
Deliver photo-based condition summary
Same-day report includes annotated photo log, slope diagram, damage map, remaining service life estimate, and repair-versus-replace decision framework with cost ranges.
How Does a Roof Inspection Help Catch Problems Early?
You notice a ceiling stain after the last storm and wonder how long the leak has been there. The problem is that by the time water shows up inside, the decking and insulation have already been compromised for weeks or months.
Early Detection Checkpoints
Flashing and Penetration Seals: Pipe boots, HVAC curbs, and chimney counter flashing fail before shingles do.
Ice Barrier Integrity: Self-adhered membrane at eaves degrades under freeze-thaw cycling above 7,000 feet.
Fastener Embedment and Pull-Out: Ring-shank nails back out under wind uplift; we test embedment depth and plate contact.
For Aaron Atwell, we identified two minor repairs that eliminated leaks without a full reroof, saving him the cost and hassle of unnecessary replacement. We once cleared a roof that another contractor had condemned, only to watch the homeowner ignore our ventilation recommendations and end up with condensation damage two winters later. Front Range hail is behind most of this work, so we document hail damage on soft metals and test squares before anything gets repaired.
What a Front Range Roof Inspection Includes
You're stuck between a roofer who says you need a full replacement and an insurance adjuster who sees no damage. A third-party inspection cuts through the noise. When damage stays inside one or two areas, targeted roof leak repair is usually the better value than replacing sound material.
- Hail Impact Differentiation
- We distinguish bruising from blistering and manufacturing defects using test squares on north and west slopes, then compile an insurer-ready photo log that documents impact patterns and granule loss.
- Wind Damage Identification
- Creases, torn tabs, lifted seams, and fastener back-out are mapped against ASTM D7158 wind resistance classifications and local 130 mph exposure requirements for Colorado Springs.
- Moisture Mapping and Leak Tracing
- Infrared thermography at dusk reveals temperature deltas where insulation is wet; we cross-check findings with attic decking scans to pinpoint active intrusion before interior stains appear.
Every Colorado Springs roof inspection scope we hand over lists the materials, the code items that apply, and the photos behind each line.
Service Area Coverage
Peak to Peak Roofing serves homeowners throughout Colorado Springs and the Pikes Peak region. Our team regularly works in Briargate, Rockrimmon, and the Broadmoor area, with flexible scheduling that accommodates your timeline. We coordinate inspections across the metro without requiring you to travel or wait weeks for an opening.
- Frequent projects in Fountain, Security-Widefield, and Monument along the I-25 corridor.
- Clients near the Air Force Academy and Garden of the Gods benefit from our local familiarity.
- Full coverage across the greater Colorado Springs metro area and El Paso County.
We schedule inspections across the region based on weather windows and hail-event backlogs, which can stretch timelines during peak storm season. Elevation and exposure vary significantly between neighborhoods, so we adjust our assessment protocol for homes above 7,000 feet versus those in lower valleys. Nearby crews cover the same work in Littleton roof inspection and Englewood roof inspection. See every community we cover on the areas we serve page, all backed by Peak to Peak Roofing Colorado Springs.
Colorado Springs Roof Inspections by Neighborhood
What we look at on Colorado Springs roofs area by area, and the code items verified before a permit closes.
Location & Neighborhoods
Downtown / Old Colorado CityOld Colorado City, Downtown, Shooks Run
Target ZIP Codes
80903, 80904, 80905
Local Landmarks & Housing Styles
Garden of the Gods, Old Colorado City, Colorado CollegeVictorians, Brick bungalows
What We Inspect Here
Flashing, valley metal, ventilation and deck condition on victorians and brick bungalows across Old Colorado City, Downtown and Shooks Run.
Code Items We Verify
Pikes Peak Regional Building Department permits the re-roof under the 2023 regional code, which applies the 2021 I-Codes with regional amendments.
Location & Neighborhoods
Northeast / BriargateBriargate, Cordera, Wolf Ranch, Pine Creek
Target ZIP Codes
80920, 80921, 80924
Local Landmarks & Housing Styles
United States Air Force Academy, Chapel Hills, Cottonwood Creek Park1990s and 2000s two-stories, Master-planned production homes
What We Inspect Here
Flashing, valley metal, ventilation and deck condition on 1990s and 2000s two-stories and master-planned production homes across Briargate, Cordera and Wolf Ranch.
Code Items We Verify
Two layers of felt underlayment are required on 2:12 to 4:12 asphalt shingle roofs under the regional policy for IRC R905.1.1.
Location & Neighborhoods
Powers Corridor / East SideSprings Ranch, Stetson Hills, Village Seven
Target ZIP Codes
80915, 80916, 80922
Local Landmarks & Housing Styles
the Powers Boulevard corridor, Sand Creek TrailRanches, Newer production two-stories
What We Inspect Here
Flashing, valley metal, ventilation and deck condition on ranches and newer production two-stories across Springs Ranch, Stetson Hills and Village Seven.
Code Items We Verify
The regional department inspects the finished roof, and shingles are fastened to the manufacturer wind schedule.
Location & Neighborhoods
Westside / BroadmoorBroadmoor, Cheyenne Cañon, Rockrimmon, Skyway
Target ZIP Codes
80906, 80907, 80919
Local Landmarks & Housing Styles
The Broadmoor, Cheyenne Mountain, North Cheyenne Cañon ParkHillside custom homes, Tile-roofed estates
What We Inspect Here
Flashing, valley metal, ventilation and deck condition on hillside custom homes and tile-roofed estates across Broadmoor, Cheyenne Cañon and Rockrimmon.
Code Items We Verify
Class A fire rating and wildland exposure details matter on the hillside lots, and the permit closes at the regional final inspection.
Dispatched Directly From Our Denver Headquarters
Located at 4155 E Jewell Ave #1100, Denver, CO 80222. Our licensed inspectors provide zero-cost storm damage assessments and full Xactimate insurance support across every Colorado Springs ZIP code.
Nearby Communities We Also Serve
Same crews, same permit process, dispatched across the Front Range.
More Roofing Services in Colorado Springs
01Colorado Springs Roof RepairTargeted leak, flashing, and shingle repairs with water testing.02Colorado Springs Roof Hail DamageHail bruising documented with photo evidence adjusters accept.03Colorado Springs Roof Insurance ClaimClaim filing, adjuster meetings, and supplement support start to finish.04Colorado Springs Metal RoofStanding seam and impact-rated metal systems built for Front Range weather.05Colorado Springs Roof ReplacementFull tear-off and permit-ready replacement built to current code.06Colorado Springs Roofing OverviewCodes, permits, and everything Peak to Peak Roofing handles across Colorado Springs.
Frequently Asked Questions
JJ Hedden
Founder & Owner
Meet The Owner
JJ Hedden, Founder & Owner
JJ Hedden founded Peak to Peak Roofing & Exteriors so Colorado Springs property owners would have a roofer who is still reachable after the truck pulls away. He came up through inspections, claims and installations, so the standards our crews work to are the ones he set on roofs himself.
Inspections are where he started. Every Colorado Springs roof gets walked slope by slope with photos of granule loss, soft metal hits and flashing gaps, and when the honest answer is that the roof has years left, that is the answer you get.
- 16+ years in Colorado roofing
- Reads the inspection photos himself
- Straight repair versus replace answers
- Family owned, Denver based
Serving Colorado Springs Since 2008
Get a Clear Roof Condition Report Before the Next Hailstorm
You need documentation that satisfies your insurance adjuster, your lender, or your own peace of mind. We deliver same-day photo logs, damage maps, and condition grades backed by 415 verified reviews and an A+ BBB rating. Schedule your inspection now.
Detailed Photo ReportInsurance Claim Help
4.9/5 from happy homeowners
Limited Time Offer!
● Inspectors Available Today in Colorado Springs
Claim Your Free Inspection
No obligation, no pressure, and a written scope you can keep.
OR CALL DIRECTLY
(720) 893-3823G
"Peak to Peak was great, they helped me with a repair on my roof. Helped me to extend the life of my roof."
- Luke Howard