Verify Permit and Code Requirements
At Peak To Peak Roofing, we file the Arvada reroofing permit, confirm wind-zone values, and schedule the city inspection before material delivery.

Peak To Peak Roofing delivers roof replacement in Arvada with permit filing, Class 4 impact-resistant materials, and city inspection coordination. We navigate the 136 Vult and 150 Vult wind zones split at Highway 93 so every install meets adopted code.
Certified, Accredited, And Reviewed





You open the insurance estimate and see line items for architectural shingles, ice barrier, and ridge vent, but no explanation of what those actually do or why the adjuster's scope might be missing critical steps. We walk you through material grades, typical costs per square, and what the timeline looks like from permit to final inspection.
| Scope or factor | Typical cost or specification | What drives the price | Code or standard reference |
|---|---|---|---|
| Architectural asphalt replacement, 2,000 to 2,500 sq ft home | $11,650 to $24,250 | Roof area, pitch, number of layers removed and access for the dump trailer. | IRC R905.2 asphalt shingle application. |
| Cost per roofing square | $450 to $975 | A square covers 100 square feet; most homes here run 22 to 28 squares. | Written measurement, not an aerial estimate alone. |
| Impact-resistant Class 4 upgrade | $975 to $2,425 | Upgrade over standard architectural shingles, often offset by an insurance discount. | UL 2218 Class 4 impact rating. |
| Decking replacement found at tear-off | $70 to $120 per sheet | Rotted or delaminated sheathing has to be replaced before new material goes down. | IRC R803 sheathing requirements. |
| Standing seam metal instead of asphalt | $10.50 to $17.00 per square foot | Roughly double the asphalt rate up front for two to three times the service life. | Manufacturer installation instructions. |
| Steep pitch or multi-story access | Adds 15% to 30% | Slopes above 8:12 and tall elevations add staging and fall protection hours. | OSHA 1926.501 residential fall protection. |
| Permit and final inspection | $150 to $400 | Arvada permits every full replacement and inspects before the job closes. | Local building department permit schedule. |
| Wind standard | 136 Vult | Fastening schedule and edge flashing must meet this uplift rating. | Wind zone, east of Highway 93 |
| Wind standard | 150 Vult | The 14 mph difference from the east zone changes nail spacing and underlayment specs. | Wind zone, west of Highway 93 |
Figures are typical roof replacement ranges for Arvada in 2026, benchmarked against published Denver metro roofing cost data and adjusted for local permit fees and access. Code references point to the International Residential Code as adopted locally, UL 2218 impact testing, ASCE 7 wind loads and OSHA fall protection rules. Your written estimate follows an on-site inspection.
Most homeowners call us after a storm, but the real question is whether the roof was installed correctly the first time. Arvada sits in the Front Range hail corridor, and a roof that meets minimum code today will fail faster if the deck wasn't renailed or the ice barrier stops six inches short of where freeze-thaw cycles actually reach. You can see everything we handle locally on our Arvada roofing page.
"I did call and talked with a lot of different companies but Peak to Peak is the right choice.", Eric Bui

Arvada clients look for a contractor who understands the city's permit process, knows which materials meet the impact-resistance requirement, and coordinates inspections without delays. Peak To Peak Roofing delivers that with verifiable credentials and a track record across the Front Range.
"Working with Calvin has been an incredible experience. He knows his stuff.", Dawn Goff

Every Arvada project runs on the same documented sequence, from first inspection through the city's final sign-off.
At Peak To Peak Roofing, we file the Arvada reroofing permit, confirm wind-zone values, and schedule the city inspection before material delivery.
Tear-off exposes the deck so we can identify soft spots, renail to pattern, and replace damaged sheathing before underlayment goes down.
Ice barrier, synthetic underlayment, drip edge, step flashing, and field shingles follow manufacturer instructions and adopted IRC R905 requirements exactly.
Most residential roof replacements in Arvada range from $8,000 to $18,000 depending on squares, pitch, and material grade. Denver pricing runs similar, though Arvada's Class 4 impact-resistance requirement and wind-zone fastening specs can add $500 to $1,200 to the total. Deck repairs, ventilation upgrades, and permit fees push the final number higher.
Wind Zone and Fastening: West of Highway 93 requires 150 Vult fastening, which increases labor and material costs compared to the 136 Vult zone to the east.
Deck Condition: Soft or damaged sheathing discovered during tear-off adds material and labor; renailing the entire deck to manufacturer pattern is standard but time-intensive.
Ventilation and Flashing: Ridge vent cuts, soffit intake upgrades, and custom flashing at chimneys or skylights extend the timeline and increase the bid.
Every estimate varies by job scope, and we provide a detailed breakdown before work begins. For Dan Kreppein, we coordinated solar panel removal and reinstall, completed both roof and garage in one day, and handled all city inspections without delays. Every scope starts with a documented roof inspection, so the work matches what the roof actually shows rather than a guess from the driveway.

You schedule the replacement, the crew arrives on time, and by day three you notice they're installing synthetic underlayment where the permit called for #30 felt. Small substitutions happen on every job, and most homeowners never know which ones matter and which ones don't. Homeowners who are tired of losing shingles to every storm often move to metal roofing on the next install instead.
Every Arvada roof replacement scope we hand over lists the materials, the code items that apply, and the photos behind each line.

Peak To Peak Roofing serves residents throughout Arvada and the surrounding area, including Westminster, Broomfield, and the Highway 93 corridor west toward Golden. Our team schedules projects across Jefferson County and coordinates permit filings with the Arvada Building Division. We offer flexible scheduling to match your timeline and the city's inspection availability.
We coordinate projects across Arvada's two wind zones, adjusting fastening schedules and underlayment specs depending on whether your home sits east or west of Highway 93. Response times vary by season, but most estimates are scheduled within three business days and completed within a week of permit approval. Nearby crews cover the same work in Westminster roof replacement and Lakewood roof replacement. See every community we cover on the areas we serve page, all backed by Peak to Peak Roofing Arvada.
How a replacement runs in each part of Arvada, from tear-off and deck condition to the systems we specify.
Location & Neighborhoods
Target ZIP Codes
Local Landmarks & Housing Styles
Replacement Scope Here
Systems & Code Notes
Location & Neighborhoods
Target ZIP Codes
Local Landmarks & Housing Styles
Replacement Scope Here
Systems & Code Notes
Location & Neighborhoods
Target ZIP Codes
Local Landmarks & Housing Styles
Replacement Scope Here
Systems & Code Notes
Location & Neighborhoods
Target ZIP Codes
Local Landmarks & Housing Styles
Replacement Scope Here
Systems & Code Notes
Dispatched Directly From Our Denver Headquarters
Located at 4155 E Jewell Ave #1100, Denver, CO 80222. Our licensed inspectors provide zero-cost storm damage assessments and full Xactimate insurance support across every Arvada ZIP code.
Same crews, same permit process, dispatched across the Front Range.


JJ Hedden
Founder & Owner
Meet The Owner
JJ Hedden founded Peak to Peak Roofing & Exteriors so Arvada property owners would have a roofer who is still reachable after the truck pulls away. He came up through inspections, claims and installations, so the standards our crews work to are the ones he set on roofs himself.
On a full replacement he reviews the scope before it goes out: decking condition, ventilation balance, ice and water coverage and the flashing details. If a Arvada roof can be repaired instead, he will say so rather than sell a tear off.
Peak To Peak Roofing files your Arvada permit, installs Class 4 impact-resistant materials, and coordinates the city inspection so your roof meets adopted code from the first nail. Call us now to schedule your estimate and protect your home before the next hail season.




4.9/5 from happy homeowners
● Inspectors Available Today in Arvada
No obligation, no pressure, and a written scope you can keep.
"Peak to Peak was great, they helped me with a repair on my roof. Helped me to extend the life of my roof."
- Luke Howard
Free inspection, same day answers